The Mark 4 solar water heater by Calpak has a net nominal capacity of 200 liters and is suitable to meet the hot water needs of up to 5 people. It is manufactured according to international standards and carries all the certificates and test reports that confirm its quality. It is an alternative option for hot water production, which is completely environmentally friendly and is considered ideal for areas with high sunshine, such as Greece.
It is dual-energy, meaning that it can operate in two ways: solar or electric. This means that inside the water tank there is an electrical resistance, so that on days when there is little sunshine due to cloudy weather you can operate your solar water heater with electricity, and always have hot water.
The water storage tank has an internal enamel coating, which coats the inside of the tank at every point and results from the application of enamel (glass) to metal. As a result, it is protected from rust, since the water does not come into contact with the walls, thus ensuring clean drinking water at all times.
Its collector has a surface area of 4.2m², capable of producing up to 420 litres of hot water. It is selective, the type most commonly used in recent years in solar water heaters. It has lower heat losses than a simple collector, and therefore higher efficiency.
Users who have bought it stand out mainly because it keeps the water hot for a long time.
The best solar we have made so far!
You want the Mark 4 especially if:
- You care about both performance and aesthetics in what you buy
- You want a solar that really stands the test of time
- You want the lowest possible cost for every hot bath you take
COLLECTOR :
- Total surface area 4.26 m²
- Absorbent from full plate selective surface
- Single-point frame made of anodized aluminium
- Unbreakable glass
BOX:
- Dual energy
- Container capacity 200 lt
- Closed circuit
- Internally coated according to DIN4753/3
- High-density polyurethane insulation
GENERAL CHARACTERISTICS OF THE SERIES
- Absorber technology: 0.4mm high-selective TINOX (a > 95% & e < 5%), ultrasonic -Waterframe : Galena -Glass quality: 3.2mm (tempered) prismatic safety solar glass, low-iron(low-iron) and high transmittance >91.5%
- Collector frame: Anodised aluminium double-wall (pressed) with mineral wool insulation
- Tank quality: Steel DC-03 2,5mm (according to DIN 10130)
- Insulation : Ecological polyurethane of 43kg/m3 density and 45mm thickness
- Anti-corrosion protection: direct enameling according to DIN 4753/3
- Alternators: DC-03 1.5mm steel jacket type
- Support system: Base made entirely of aluminium.
- Connection set: multilayer pipe Φ20 with ISIPOPE insulation and TIMME rack
- Accessories included: 10 bar heavy duty TIMME back pressure safety valve, 2.5 bar closed circuit safety valve, DOW Calpak Nox (propylene glycol) anti-corrosion and antifreeze fluid
- Certifications : Solar-Keymark, SRCC, CE, RoHS (Storage container hygiene certificate)
- Warranty 12 twelve years
